The author is a particular fan of fishing, and like many anglers is the proud owner of not only a fishing rod, but also a boat: and this is where the electronics comes in. The author's boat has an electric outboard motor, and with his mind wrapped up in his sport it can easily happen that the battery is allowed to run down, leaving the not very enticing prospect of a long paddle home.
Sensor module
Resistors
R1 = 470Ω
R2 = 3kΩ09
R43 = 1kΩ
Capacitors
C1,C2 = 15pF ceramic, lead pitch 5mm
C3,C4 = 10nF ceramic, lead pitch 5mm
C5 = 100μF 25V radial, diameter 6.3mm
C6,C7, C10-C13 = 100nF ceramic, lead pitch 5mm
C8 = 10μF 25V, radial, lead pitch 2.5mm
C9 = 100nF ceramic, lead pitch 5mm
Semiconductors
D1 = LED, red
D2 = 1N4001
IC1 = PIC16F676-20I/P, programmed, Elektor
SHOP # 070821-41
IC2 = 7805
IC3 = ACS750SCA-050
IC4 = MAX232 (DIP16)
Miscellaneous
K1 = 6-way mini-DIN socket, PCB mount
K4,K5,K6 = spade terminal
2 M3 screws and nuts
F1 = miniature fuse, 1A, fast, for solder mounting
S1 = on/off switch
Mini DIN cable with moulded 6-way plugs for
connection of module
X1 = 20MHz quartz crystal, parallel resonance
PCB, ref. 070821-1, from www.thepcbshop.com
Display module
Resistors
R4,R5,R7,R9 = 2kΩ7
R6,R8 = 56Ω
R10 = 27kΩ
P1 = 10kΩ preset
Capacitors
C14 = 220μF 16V radial, lead pitch 2.5mm,
diameter 6.3mm
C15,C16,C17,C19-C22 = 100nF ceramic, lead pitch
5mm
C18 = 10μF 25V radial, lead pitch 2.5mm
C23,C24 = 15pF ceramic, lead pitch 5mm
Semiconductors
D3 = 1N4148
T1 = BC337
IC5 = 7805
IC6 = MAX232 (DIP16)
IC7 = PIC16F628-20/P, programmed, Elektor SHOP
# 070821-42
Miscellaneous
J1 = 2-way pinheader and jumper
S2 = pushbutton
K2 = 6-way mini-DIN socket, PCB mount
K3 = 6-way pinheader, lead pitch 2.54mm
LCD1 = LCD, 2x16 characters, e.g. EA DIP162
DNLED
X2 = 20MHz quartz crystal, parallel resonance
PCB, ref. 070821-2, from www.thepcbshop.com
Informative articles
Password forgotten?
)
