Home › ELEKTOR FORUMS › Elektor ESR / C Meter (September 2005) › ESR test frequency

ELEKTOR FORUMS

Please log in to post a reply or subscribe / unsubscribe to topics

Topic: ESR test frequency
Author	Post
AlexM_ 2 posts Popping In	29-11-2005 21:39 Why there is a 166kHz frequency on RA1, RA2 (IC2) output instead of 100 kHz as it was written in article?
Elektor Editor 501 posts Power User	30-11-2005 16:28 The difference is due to programming of the control PIC. Although 166 kHz insted of 100 kHz will not seriously affect the absolute ESR value readings, in some cases it does complicate the calibration process as described. A new version of the firmware (which also corrects other minor flaws of the instrument) is expected shortly. Jan Buiting
sonytel 32 posts Occasional Visitor	23-06-2006 19:06 Hello, from Argentina, I Need Send Me The PCB in PDF format by Mail? Thanks Gabriel
sonytel 32 posts Occasional Visitor	28-04-2008 19:57 A new version of the firmware (which also corrects other minor flaws of the instrument) is expected shortly. Jan Buiting Hello, Jan Buiting, No Update abou this Firmware? Best Regards GAbriel Argentina
hadihf 24 posts Occasional Visitor	01-08-2008 12:28 Hi, Also waiting for the update... Regards Farooq
hadihf 24 posts Occasional Visitor	01-08-2008 12:36 http://www.voitzsch.net/cmeter.shtml
sonytel 32 posts Occasional Visitor	17-09-2008 19:26 Hello, very thanks. the Update Work perfect. But, no Update by PIC 16F84 Frecuency generator? for stabilyser Frecuency at 200Khz? Best Regards. GAbriel Argentina

This hands-on book covers a series of exciting and fun projects with PIC microcontrollers. You can build more than 50 projects for your own use.