Home › ELEKTOR FORUMS › Explorer-16 with free CD-ROM (January 2007) › Problems connecting to PC

ELEKTOR FORUMS

Please log in to post a reply or subscribe / unsubscribe to topics

Topic: Problems connecting to PC
Author	Post
Limba 3 posts Popping In	23-02-2007 19:13 I have a litle problem. My computers didn't recognize board from USB when powered. Preprogrammed demos on the PICs works fine. PICkit2 also works fine. t: Juha Linna
Radiomann1 75 posts Frequent Visitor	23-02-2007 21:08 Put the PICkit 2 on the Explorer16 board and conect to the PC. Then you can flash with the PICkit2 Software version 2.01or higher. sorry my english. Best Regards Werner
Luc21 54 posts Frequent Visitor	23-02-2007 21:49 Thanks Werner, only one correction: version 2.10 or higher. This version can be found on the CD in the January issue of Elektor or on Microchip's website.
Limba 3 posts Popping In	23-02-2007 21:55 ok now i can program it. Reason: PICkit2 wrong way connected. I used it triangle to pin 1 but it works when I connected triangle to pin 6. t: Juha Linna
Radiomann1 75 posts Frequent Visitor	24-02-2007 17:05 Sorry, i have Version 2.01 and it works from the ELEKTOR CD. But the newer one is 2.10 Regards Werner
Limba 3 posts Popping In	03-04-2007 17:44 Few weeks ago I looked from Microchip forums about Explorer-16 and there was mention about firmware of PIC18F is not ready yet. t: Juha

This hands-on book covers a series of exciting and fun projects with PIC microcontrollers. You can build more than 50 projects for your own use.