Home › ELEKTOR FORUMS › Elektor OBD-2 Analyser (July/Aug. 2005) › Only red LED lights

ELEKTOR FORUMS

Please log in to post a reply or subscribe / unsubscribe to topics

Topic: Only red LED lights
Author	Post
Mactitan 21 posts Occasional Visitor	05-08-2005 01:59 I took the advice of inserting cap C7 and IC7 but can only get the the red LED to light. Please confirm the connection pads to be used for the two components in the form of a diagram, or a more detailed description. Thank you Ian
deltex 1 post Popping In	08-08-2005 20:06 please check link is removed. Look at picture on page 23 this will help you to identify the orientation of the transistor. C7 earth goes to the drill hole directly below. Use an DVM to give you confidance that this is the earthy side, Before inserting IC's. I laid C7 almost flat over the 2 resistors.
Mactitan 21 posts Occasional Visitor	15-08-2005 04:45 Thank you, it is working just fine now.
Mr.X 1 post Popping In	13-09-2007 17:38 I have put in the C7 and IC7 as described and still the RED LED stays on and the green LED and yellow LED are off....Any one know what is wrong???

Please log in to post a reply or subscribe / unsubscribe to topics

Spotlight

Design your own Embedded Linux Control Centre on a PC

These days a lot of options exist if you want to control home electrical appliances. This book covers a do-it-your-self system made from recycled components.

More